The most compact in its class, the Christie M Series projector platform provides the high-performance and feature-rich standards expected in all Christie products. Embedded warping, blending and color matching, along with built-in portrait capabilities give you even more installation flexibility with this SXGA+ model.

Technology	3-chip DLP
Resolution	1400 x 1050 SXGA+
Brightness	11,550 center lumens
Contrast	Up to 10,000:1
Illumination	Dual Osram® 350W P-VIP
Lamp life	1,500 hours, up to 2,000 in eco mode
Height	10.2″ (259 mm)
Width	19.7″ (500 mm)
Depth	22.1″ (561 mm)
Weight	55 lbs (25 kg)

Brightness	Dual lamp: 11,550 center (10,500 ANSI) lumens Single lamp: 5,775 center (5,250 ANSI) lumens
Contrast	2500-10,000:1 (full on/off) 650:1 ANSI (typical)
Uniformity	90% brightness uniformity
Display type	3-chip 0.95″ DMD
Resolution	SXGA+ (1400 x 1050)
Lamp type	Dual Osram 350W P-VIP
Lamp life	High power: 1500 hrs @ 350W Low power: 2000 hrs @ 300W
Standard inputs	Analog BNC Dual-link DVI
Optional inputs	Analog BNC Dual-link DVI Dual SD/HD-SDI Video decoder Twin HDMI
Input signals	HDTV formats VGA through to QXGA (2048 x 1536) Accepts all current HDTV/DTV formats Multi-standard video decoder Horizontal and vertical scaling, all inputs
Pixel clock	165 MHz
Scan rates	Horizontal: 15 to 120 kHz Vertical: 23.97 to 150 Hz
Inputs, control & networking	RS232 in/out RS422 in Ethernet (10/100) USB device GPIO (RS232 9-pin male connector) Built-in backlit LCD keypad Remote control (with optional wired XLR connection)
Optical systems	Dust sealed, 3-chip DMD light engine Motorized horizontal and vertical lens offset Scheimpflug (tilt) adjustment Built-in light shutter Tool-free lens insertion system
Fixed lenses	ILS lens 0.73:1 SX+/0.67:1 HD* ILS lens 1.2:1 SX+/1.1:1 HD
Zoom lenses	ILS lens 1.25-1.6:1 SX+/1.16-1.49:1 HD** ILS lens 1.5-2.0:1 SX+/1.4-1.8:1 HD ILS lens 2.0-2.8:1 SX+/1.8-2.6:1 HD ILS lens 2.8-4.5:1 SX+/2.6-4.1:1 HD ILS lens 4.5-7.3:1 SX+/4.1-6.9:1 HD ILS lens 7.3-11.2:1 SX+/6.9-10.4:1 HD
Offsets	±100% Vertical ±50% Horizontal (* ±23%V / ±13%H) (** ±70%V / ±45%H)
Standard accessories	User manual IR remote Line cord
Optional accessories	Coarse dust filter Fog juice filter Ceiling mount Ceiling mount extension ILS lens adapter kit Stacking frame Christie AutoStack™ DMX512 interface card
Enhanced feature sets	LiteLOC™ Comprehensive Color Adjustment (CCA™) Embedded Christie Twist™ image warping and edge-blending Intelligent Lens System (ILS™) for zoom, focus, horizontal and vertical offset for all lenses Auto setup Digital keystone correction Dynamic iris Menus in five languages 99 channel memories Multi-windowing and processing (up to a 3 x 3 array) Motorized yellow notch filter (HD & WUXGA models only) Black level blending Built-in portrait display capabilities* 3D upgradable ^*Christie M Series stacking frame is required in portrait orientation.
Operating voltage	110-240 VAC 50/60 Hz
Operating current	13.2 A @ 100 VAC
Power	1320W
Dissipation	4508 BTU/hr
Size	(LxWxH): 22.1 x 19.7 x 10.2″ (561 x 500 x 259mm)
Shipping dimensions	(LxWxH): 29.0 x 27.0 x 24.6″ (737 x 689 x 625mm)
Weight	55 lbs (25kg)
Shipping weight	87 lbs (39kg)
Operating environment	Temperature: 40 to 104° F (5 to 40° C) Humidity: 10-80% non-condensing
Regulatory approvals	UL/CSA/IEC 60,950 (3rd edition) FCC Class A, CE, CCC This product conforms to all relevant European directives, standards, safety, health and environmental concerns RoHS, WEEE
Limited warranty	Three years parts and labor (including light engine) Contact an authorized Christie representative for full details of our limited warranty

Due to constant research, specifications and features are subject to change without notice.

The Christie DS+10K-M, at 11,550 center lumens (dual lamps, 350W), offers high efficiency and low cost of ownership by drawing a maximum power of 1320W giving you full brightness while using less power.

Features

SXGA+ resolution (1400 x 1050)
11,550 center lumens
Variable contrast ratio of 2500-10000:1 using dynamic iris (full on/full off) / 650:1 ANSI for crisp, detailed images.
At maximum brightness this projector draws a maximum power of 1320W at 100V
Smallest chassis in its class
Dual mercury lamps (350W)
Comprehensive Color Adjustment (CCA™)
Embedded Christie Twist™ image warping and edge-blending
Dust sealed engine, filter-free design
Intelligent Lens System (ILS™) for zoom, focus, horizontal and vertical offset
Multi-windowing and screen processing (up to a 3×3 array)
Dynamic iris
3D capable model available in Mirage Series
3D upgradable
AutoDesk® Revit® model
Built-in portrait display capabilities

Whether the application is education, entertainment, gaming, home cinema or live events – Christie’s 3-chip DLP projectors are 2D and 3D capable. The Christie DS+10K-M is available as a 3D display solution or it can be upgraded from its existing 2D display technology to include 3D capabilities. Christie is the first to offer an upgrade path for its 3-chip DLP projectors to equip them with the Mirage advanced 3D functionality.

All this, combined with a 3-year warranty and our industry-leading service and support, enables the M Series to provide high performance and peace of mind for all users.