The most compact in its class, the Christie M Series projector platform provides the high-performance and feature-rich standards expected in all Christie products. Embedded warping, blending and color matching, along with built-in portrait capabilities give you even more installation flexibility with this SXGA+ model.<

Technology	3-chip DLP
Resolution	1400 x 1050 SXGA+
Brightness	11,500 center lumens
Contrast	Up to 10,000:1
Illumination	Dual Osram® 350W P-VIP
Lamp life	1,500 hours, up to 2,000 in eco mode
Height	10.2″ (259 mm)
Width	19.7″ (500 mm)
Depth	22.1″ (561 mm)
Weight	55 lbs (25 kg)


Image	Dual lamp: 11,550 center (10,500 ANSI) lumens Single lamp: 5,775 center (5,250 ANSI) lumens
Contrast	2500-10,000:1 using dynamic iris (full on, full off) 650:1 ANSI (typical)
Display technology and resolution	3-chip 0.95″ DLP SXGA+ (1400 x 1050) resolution
Lamp	Dual 350W PVIP High power: 1500 hrs @ 350W Low power: 2000 hrs @ 300W
Input signal compatibility	HDTV formats VGA through to QXGA (2048 x 1536) Accepts all current HDTV/DTV formats Multi-standard video decoder Horizontal and vertical scaling, all inputs
Scan rates	Horizontal: 15 to 120 kHz Vertical: 23.97 to 150 Hz
Pixel clock	165 MHz
Inputs, controls and networking	RS232 in/out RS422 in Ethernet (10/100) USB device GPIO (RS232 9-pin male connector) Built-in backlit LCD keypad Remote control (with optional wired XLR connection)
Optical system	Dust sealed, 3-Chip DMD light engine Motorized horizontal and vertical lens offset Scheimpflug (tilt) adjustment Built-in light shutter Tool-free lens insertion system
Fixed lenses	ILS lens 0.73:1 SX+/0.67:1 HD* ILS lens 1.2:1 SX+/1.1:1 HD
Zoom lenses	ILS lens 1.25-1.6:1 SX+/1.16-1.49:1 HD** ILS lens 1.5-2.0:1 SX+/1.4-1.8:1 HD ILS lens 2.0-2.8:1 SX+/1.8-2.6:1 HD ILS lens 2.8-4.5:1 SX+/2.6-4.1:1 HD ILS lens 4.5-7.3:1 SX+/4.1-6.9:1 HD ILS lens 7.3-11.2:1 SX+/6.9-10.4:1 HD
Lens offsets	+/- 100% Vertical +/- 50% Horizontal (* ±23%V / ±13%H) (** ±70%V / ±45%H)
Standard accessories	Analog BNC input card Dual-link DVI input card Dual SD/HD-SDI input card Video decoder User manual IR remote Line cord Stacking frame
Optional accessories	Coarse dust filter Fog juice filter Ceiling mount Analog BNC input card Dual-link DVI input card Dual SD-HD-SDI input card Video decoder Twin HDMI™ input card DMX512 interface card
Enhanced feature sets	LiteLOC™ Comprehensive Color Adjustment (CCA™) Embedded Christie Twist™ image warping and edge-blending Intelligent Lens System (ILS™) for zoom, focus, horizontal and vertical offset Multi-windowing and screen processing (up to a 2×3 array) Dynamic iris Menus in five languages 99 channel memories Auto setup Digital keystone correction Dust sealed engine, filter-free design Motorized yellow notch filter (HD & WUXGA models only) Built-in portrait display capabilities* 3D upgradable *Christie M Series stacking frame is required in portrait orientation.
Power requirements	110-240 VAC 50/60 Hz operating voltage 13.2 A @100V operating current 1320 W power consumption 4508 BTU/hr dissipation
Dimensions	(L x W x H): 22.1 x 19.7 x 10.2″ (561 x 500 x 259mm) Weight: 55 lb (25 kg) Shipping weight: 87 lb (39kg) Shipping dimensions – (LxWxH): 31.3 x 24.2 x 28.1″ (795 x 615 x 715mm)
Operating environment	Temp: 40 to 104° F (5 to 40° C) Humidity: 10-80% non-condensing
Regulatory approvals	UL/CSA/IEC 60950 (3rd edition) FCC Class A, CE, CCC This product conforms to all relevant European directives, standards, safety, health and environmental concerns RoHS, WEEE
Limited warranty	3 years parts and labor (including light engine)

Due to constant research, specifications and features are subject to change without notice.

The Roadster S+10K-M, designed with stagers in mind offers high efficiency and low cost of ownership by drawing a maximum power of 1320W giving you full brightness while using less power.

Features

SXGA+ resolution (1400 x 1050)
11,500 center lumens
Variable contrast ratio of 2500-10000:1 using dynamic iris (full on, full off) / 650:1 ANSI for crisp, detailed images.
At maximum brightness (10500 ANSI lumens), the projector draws a maximum power of 1320W
Dual mercury lamps (350W)
Comprehensive Color Adjustment (CCA™)
Embedded Christie Twist™ image warping and edge-blending
Dust sealed engine, filter-free design
Intelligent Lens System (ILS™) for zoom, focus, horizontal and vertical offset
Multi-windowing and screen processing (up to a 3×3 array)
Ships with a stacking frame and four input cards
3D capable model available in Mirage Series
3D upgradable
Built-in portrait display capabilities

All this, combined with a 3-year warranty and our industry-leading service and support, enables the M Series to provide high performance and peace of mind for all users.